MERCON
  1. Produkte
    • Druck

    • Füllstand

    • Durchfluss

    • Ventile

    • Füllstand Schüttgüter

    • Temperatur

    • Gas-Detektoren

    • Steuern & Regeln

  2. Service
  3. Anwendungen
  4. Aktuelles
  5. Über uns
  6. Downloads
  7. Karriere
  8. Kontakt

Menu

  • DE
  • PL
  • EN
  1. Main page
  2. Produkte
  3. Füllstand
  4. Kapazitive Schalter
  5. Level switch for liquids and pastes

wróć

KMW Level switch for liquids and pastes

Klay Instruments

Klay Instruments

Mikrofalowy sygnalizator poziomu KLAY KMW

Robust and compact
All stainless steel
FDA and EHEDG conformity
Suitable for CIP / SIP cleaning
Accurate adjustability

Zulassungen und Zertifikate

  • CE CE
  • EHEDG EHEDG
  1. Produktbeschreibung
  2. Spezifikation
  3. Downloads
  •  

    Level switch KMW is microprocessor based and can be installed in any position in tanks or piping systems. 
    The measuring principle is an electromagnetic wave (100…180MHz). A high frequency signal sweep is radiated from the sensor tip into the tank or pipe. The medium acts as a virtual capacitor, which together with a coil in the sensor, will form a circuit creating the switching point. This virtual capacity will depend of the dielectric value of the medium and is well defined for most media. 
    Therefore the KMW is suitable for almost all liquids and paste-like medias. 
    There are 7 base settings for several medias. To adjust the sensitivity there are two possibilities, by internal dipswitch or via PC with software. The characteristics of the medias are visualizable and adjustable with the PC-USB interface software. 
    For viscous and adhesive medias the KMW is available with extended PEEK sensor. Applications are high and low level detection in tanks and dry run protection of pumps in the Food & Beverage and Pharmaceutical industry.  All common hygienic process connections are available.

    • Variable Niveau
    • Ausgangssignal PNP / NPN
    • ATEX keine
    • Anschlussart 1/2 BSPP Außengewinde, 1 BSPP Außengewinde, Tri-Clamp 1-1/2", andere
    • Werkstoff (mediumberührte Teile) 316/316L
    • Dichtungen PEEK
    • Versorgungsspannung externe 24VDC
    • Elektrischer Anschluss M20x1,5 weiblich, 1/2 NPT weiblich
    • Gehäuse Edelstahl
    • IP-Schutzart IP67
  • `
    1. Klay KMW Datasheet

      387kb | ENG

    2. Klay KMW Manual

      568kb | ENG

Ähnliche Produkte

  1. Level switch for liquids

    FLX Level switch for liquids

    Robust level switch.

    Measuring principle is conductivity.

    For level detection of conductive fluids.

    Mehr

Kontaktdaten

MERCON GmbH

Im Technologiepark 1
15236 Frankfurt (Oder)

Telefon:
0335 557 1511
E-mail:
Weitere Informationen
  1. Produkte
  2. Service
  3. Anwendungen
  4. Aktuelles
  5. Über uns
  6. Downloads
  7. Karriere
  8. Kontakt

Datenschutzhinweise
© 2016-2020 MERCON

Produkt finden

Design by Tonik

X Unsere Website verwendet Cookies. Wenn Sie damit nicht einverstanden sind, ändern Sie bitte Ihre Cookie-Einstellungen.